If you want to get a welder from a well-known brand as far as quality goes, then one of these engine driven welders reviewed in this article, could suit your needs.
A gas-driven welder is a welder that uses diesel or gasoline to produce the power needed for welding. These types of welders are ideal for people who don’t do welding all the time and they don’t want to have to leave their welder plugged in all the time as well.
The best part about these types of welders is that they often double as generators and are capable of being able to be used to power other things in your home as you need. Typically, these types of welders are moved around by truck or trailer and are mainly used outdoors.
Important aspects of engine-driven welders
There are all sorts of welders available on the market that you can choose from. You will find welders that can be used for various techniques, and come at varying price tags.
You will want to look at:
- the type of welding that the welder is capable of
- the amount of power it uses, and which power supply it needs to be hooked up to so that it properly works.
- thickness of the material that the welder is capable of handling.
- durability of the unit.
- how portable the unit is in general.
Welders are expensive, and you wouldn’t want to purchase one only to find that it isn’t capable of welding the thicknesses that you need.
The main engine-driven welders that you will find consist of Stick, TIG, MIG, and Flux-Cored welders. It is important to make sure that you buy the right type of welder for the tasks that you perform on a regular basis.
In order to help you determine the type of welder that you need, we have broken down the best engine-driven welders available from the best brands.
Miller Engine Driven Welders
When you are looking to buy a miller engine driven welder, you will likely find that this is not an easy job. There are quite a few options available and it can be hard to figure out which options will best suit your needs.
It is extremely important that you take the time to determine your uses and which welding option will do the job for you.
When a budget is of importance to you, you may want to make a list of features that are essential to your needs, and then find a welder that fits both these needs and your budget.
Engine Driven Welder, Bobcat 3 Phase
If you have a moderate budget for a welder and you want to get something that is of a good quality, this is an option you should consider. This unit regularly uses 9000 watts of power in order to be able to complete its welds.
If you are hard on your welders at all, the nice case that this welder is it helps to protect the interior components from harm.
- Amps range from 40 to 275 and the number of watts used ranges from 9,500 to 11,000, depending on the amount of power being used for the task
- 12-gallon fuel capacity allows you to be able to weld without filling up as often
- Service doors on the unit allow you to be able to access the engine as you need
- A fuel gauge is on the unit so that you can see exactly how much fuel you still have in the tank
- Maintenance display on the unit, so that you know when something goes wrong or needs to be taken care of
- Lock switch on the welder will keep you safe from accidents
- Low sound levels coming from the unit save your ears from harm
The price tag of this unit could definitely be out of budget for some people
If you are willing to pay a moderate to high price as far as a high-quality engine driven welder goes, then you may be interested in this welder.
You will notice that this welder does use up more electricity than some of the smaller engine driven welders on the market, but if you don’t mind paying this high of a price for a welder then the price of electricity probably isn’t a huge deal.
Miller Bobcat 250 Diesel Engine-Driven Welder / Generator 907565
If you want to get one of the most expensive welders as far as a diesel welder generator go, then this could be your model. The product comes in a very nice case which helps to protect the interior components of the unit.
Another thing that you will like about this unit is the large number of dials and gauges on the device which allow you to be able to monitor things like fuel, power etc.
- Small, lightweight design of the unit makes it easy to move around
- You can do both an AC as well as a DC weld using this unit
- Maintenance displays will update you when you need to do some work on this unit
- Fuel gauge allows you to be able to accurately see how much fuel you have remaining
- Auto shutoff feature before the unit runs out of fuel
- Easy to maintain thanks to the access you have to the motor inside of the unit
- Hard case does a good job of protecting the interior components from harm
The price of this Miller diesel welder is very high and many people will not want to pay this much money for a welder.
If you have an ample budget and want quality for your money, you won’t be disappointed with this welder.
Being able to switch between an AC and a DC weld is ideal for people who do a lot of welding.
Additionally, the shutoff feature when you are low on fuel and the nice gauges on this unit will allow you to properly maintain the product and make it last for a very long time.
Miller Blue Star 185 Engine-Driven Welder / Generator 907664
If you have a lower budget range for a welder, but you still want the quality that Miller has to offer, then this product could be one that is of interest to you.
This unit has a very nice roll bar which helps to protect the product from harm during transportation. Is capable of welding while using 6,200 to 6,500 watts and runs on around 60-195 amps, depending on the weld.
- The fuel tank capacity is 6.25 gallons so you will not have to fill up your gas tank as often
- The unit is partially covered in a hard case to help protect it from damage
- In addition the unit has a roll cage which is great for transportation purposes
- Meters on the engine allow you to see how long you have left
- Works as a reliable power generator
- Lightweight unit makes it an easy portable welder generator
- No batteries are required to be able to use the welder
May not quite have the power to be able to perform the thicker welds that you need
As long as you aren’t constantly in need of a welder that is capable of welding very thick pieces of metal together, then this unit may be the one for you.
This product is capable of working wherever you need it to thanks to its lightweight, portable design.
Another good thing about this welder is that it has such a low price tag and that it is still fully capable of completing some very nice, accurate welds.
Conclusion on Miller welders
You should now feel as though you have a better grasp as to some of the differences between Miller welders of different price tags.
You should always think about how thick of welds you need on a regular basis when you are trying to determine the correct type of welder to buy.
Lincoln Engine Driven Welders
If you are looking at Lincoln engine welders and you are unsure as to which one you should choose, then this article is written for you.
The first thing that you should do is set some kind of a budget and you should also think about the types of tasks that you will be completing.
Here is a breakdown of some of the Lincoln engine driven welders that you can consider.
Engine Driven Welder, Eagle 10,000 Plus
If you have a mid to a high budget for an engine-driven welder, this could very well be the product for you. This welder is of an extremely lightweight design and weighs just a measly 2 lbs., ideal for transportation and overall portability.
- This welder is coated in a powder-coated red and black paint which helps to protect the unit against scratches and even rust and corrosion over time
- The paint used is ultraviolet resistant so that it doesn’t fade over time
- The engine in the unit is fully enclosed and protected
- If you need to access the engine, three doors are openable on the unit for easy access to components
- Low noise level of 76.4 dB means that this unit won’t kill your ears while you are using it
- Offers a very smooth weld
- The unit uses 50-225 amps and 9,000 watts, with a peak or 10,500 watts
- May not be affordable for everyone
- The smaller size of this unit isn’t ideal for people who misplace things
So long as you are willing to pay the price for a unit that is both made by a trusted brand and that is a portable, and lightweight design, then this may be the product for you.
If you are doing a lot of welding on a regular basis, it really is ideal to be able to carry this unit around with you. Just make sure that the amount of volts and amps works for your setup and you should be good to go.
Engine Driven Welder, Bulldog 5500
If you are looking for a cheaper option, then this engine driven welder may be the right choice for you. The unit is of a very lightweight design which makes it extremely easy to be able to carry around with you as you need.
In addition, the roll bars incorporated into its design, will allow you to be able to set the unit down without having to worry about it falling over on you, potentially breaking the unit or something else.
- This unit uses less electricity than some of the other welders on the market with amps between 70-140 and watts of around 4,000
- Lightweight design is easy to haul around
- Roll cage on the unit keeps it from falling over on you while you use it
- Small size of the unit is ideal if you don’t have a whole lot of room to use the unit
- Can be used with up to a 1/8” electrode stick
- Ideal for use on materials like steel, iron or stainless steel
If you like to use larger sticks when you weld, you will be unable to with this model.
Overall, this is a very nice product for its low price tag. This unit may not be able to produce the thickest welds on the market, but it will do the job extremely well for anything smaller you might need to weld.
The nice thing is, the cheap price tag of this unit makes it pretty affordable even for the average household. And it is still capable of completing a lot of the main functions of a more expensive welder, just with a smaller electrode stick size.
Engine Driven Welder, Ranger
If you want to go all out and get an expensive unit, then this one could be the option for you. The unit is a little bit heavier than some of the other units on this list, but it is still easy to carry around as you need.
The welder uses a total of 10,000 watts in order to weld, which allows it to be able to be used on thicker materials than other welders on this list.
- Still a pretty lightweight welder that is easy to carry around with you
- Engine is fully enclosed in the design in order to protect it from damage as much as possible
- Amp range between 50 and 250 and auxiliary power ranging from 10,000 to 11,000 watts makes this welder capable of welding thicker materials
- The unit is enclosed in a painted case which helps to make for a more durable design
- Can be used as an AC generator in a power outage
- Engine doors allow you to be able to access all of the engine components that you need, quickly and easily
- The higher price tag on this product is not affordable for everyone
- This unit will use more electricity on average than some of the smaller welders on the market
Overall this is a very nice unit if you have the budget to purchase it. You can expect the unit to last you for a very long period of time, even if you are rough on your welders, thanks to the protective case design.
Probably you may pay more for electricity in order to be able to use this unit on a regular basis, but you will also be able to produce a nicer, deeper weld.
Conclusion on Lincoln welders
Now, you should have a better grasp on the Lincoln engine welder that you want to purchase. It is always important to keep in mind the types and thickness of materials that you are going to be regularly welding.
Hobart Engine Driven Welders
Here is a breakdown of some of the Hobart engine driven welders that you can consider.
Hobart Champion 145 Welder/Generator – 10 HP, 4,500 Watts, Model# 500563
The biggest thing that this welder has going for it is its low price tag and good quality parts. The welder is capable of completing welds while using between 4,000 and 4,500 watts of power.
If you want a welder that is capable of being used with a 240- as well as a 120-volt outlet, then this welder is more than capable.
- 25-gallon gas tank on the unit allows you to be able to use the welder for long lengths of time without needing a refill
- This unit uses between 40 to 145 amps and between 4,000 and 4,500 watts of power to weld
- Capable of handling electrodes that are 5/32”
- Can weld steel that is ¼” thick
- Great for use on thinner metals like stainless steel, steel and iron
- A roll bar on this unit is incorporated into its design to help protect the unit
- Small design of this product makes it easy to transport
- The unit has wheels on it which makes it relatively easy to move around as you need
- Easy access to engine and other components for maintenance and other purposes
- If you need a welder that is capable of thicker welds, then this welder isn’t the one for you
- The welder is only partially enclosed within a case, which means that it doesn’t have optimal protection
Hobart Champion Elite Welder/Generator – 23 HP, 11,000 Watts, Model# 500562
If you have a higher budget, but still want to get a Hobart, then this could be a unit to intrigue you. This product features a very nice, smooth engine powering its design, featuring twin cylinders and 23 horsepower.
Therefore, is capable of welding while using 9,500 watts of power, and it is capable of delivering up to 11,000 watts of generator power which is ideal when the lights go out in your home or workplace.
- This unit is fully enclosed in a case which helps to offer it optimal protection from damage
- The unit sits at just under four feet long, ideal for portability and transportation purposes
- Dials and gauges on the unit will keep you informed as to how well the unit is performing and when you need to refuel
- This unit can hold up to 12 gallons of fuel to suit your daily needs
- Can run on anywhere from 40-225 amps and between 9,500 to 11,000 watts of power
- Is ideal for galvanized metal and steel welding
- The price tag of this unit might be out of reach for some people
- Not having wheels on the unit isn’t very convenient as you will have to pick the unit up or drag it around
- There is no roll cage on the unit
Hopefully, after reading this article you are more informed about the different engine driven welders available.
It is important to make sure that you think about the thicknesses of the materials that you intend to weld. Also, don’t forget how much you want to be able to move the unit.
One of the hardest parts of buying a welder can be choosing a brand to buy from.
It is nice to know the company that you are buying from so that you can have a better idea as to the quality of the product that you should expect.
These companies have been around for many years and have established themselves as premium brands on the market. This is certainly something that you may want to take note of and consider when you are making a purchasing decision.